Sealing rings and shaft hole pairs are frequently subject to damage; if not properly lubricated during assembly operations, there will be a risk of compromising functionality during the early stages of use.
Particular attention should be paid to the verification of compatibility between the construction materials used for sealing elements and the lubricant being used, whose chemical inertness towards the polymeric material must be ascertained.
Macon Research has at its disposal specific test benches for conducting compatibility tests on newly formulated polymeric materials.
Maconsolv Dust FG | Silicone | H20 | -- | Silicone fluid emulsion for assembly |
Ghost Emulsion 08 | Synthetic | H20 | -- | Lubricant temporary for assembly |
Product | Base fluid | Thickener / Additives / Solid lubricants | Temperature range | Application |
Maconpaste HP | Synthetic | Metallic soap / solid lubricants / EP AW | -20 + 160°C | Lubricant paste with a high content of solid lubricants. Ideal for metal assemblies |
Macongrease Litek 720/T | Mineral | Lithium complex / PTFE | -25 + 140°C | Assembly of sealing elements in NBR-VITON |
Maconpaste YLT-3000 | Synthetic | Metallic soap / PTFE | -40 + 140°C | Lubricating paste for Devlon, PEEK, KEL, F, industrial valves |
Macongel 3000 | PAG | Gel | -- | Water-soluble lubricating gel for assembly |
Fluorosil 680 R | Synthetic | Inorganic | -40 + 200°C | O-ring fittings water assembly |
Fluorosil 59H | Silicone | EP / PTFE | -20 + 140°C | Assembly of seals in NBR axles and gearboxes |
• Greases • Oils
HEAD OFFICE:
Macon Research Srl
Via Santa Lucia, 8/D
36056 Tezze sul Brenta (VI)
Tel.+39 0424.57.39.66
Fax.+39 0424.57.39.66
Mail: info@maconresearch.com
ADMINISTRATIVE OFFICE:
Macon Research Srl
Via L. Tolstoj, 43/O
20098 San Giuliano Milanese (MI)
Tel.+39 02.98.24.41.61
Fax.+39 02.98.24.4161
Mail : info@maconresearch.com
The data contained in this catalogue are based on our general experience and knowledge at the time of publication and are intended to provide the reader with technical information about any possible uses. This information does not, however, constitute an assurance as regards product characteristics in relation to specific cases. We recommend that you request an interview with our consultants. We would be happy to provide you with samples.