The containment of costs for obtaining value in a particular gear has led to the gradual replacement of classic components obtained through mechanical processing and through particulars developed through the sintering process.
This process has been developed over the years and has now reached a high standard of quality: superior consistency in terms of mechanical and dimensional characteristics.
A fundamental contribution to quality is also provided by the fill fluid introduced into the component during the impregnation phase. Synthetic oil capable of developing a persistent lubricant film can determine a fundamental contribution in efficiency of up to 15% of the component's estimated total life.
Fluidfilm R series | PAG | AW / EP | -40 + 130°C | Power window motors sintered bushings |
Fluidfilm R-760 | Esters | AW / EP / solid lubricants | -40 + 135°C | High temperature sintered epicyclical gears |
Ultrasynt series | PAO | AW / AO | -50 + 120°C | Electric motors sintered bushings |
Product | Base fluid | Thickener / Additives / Solid lubricants | Temperature range | Application |
Macongrease BS-710 | PFPE | Gel | -50 + 120°C | Electric motors reserve sintered bushings |
• Greases • Oils
HEAD OFFICE:
Macon Research Srl
Via Santa Lucia, 8/D
36056 Tezze sul Brenta (VI)
Tel.+39 0424.57.39.66
Fax.+39 0424.57.39.66
Mail: info@maconresearch.com
ADMINISTRATIVE OFFICE:
Macon Research Srl
Via L. Tolstoj, 43/O
20098 San Giuliano Milanese (MI)
Tel.+39 02.98.24.41.61
Fax.+39 02.98.24.4161
Mail : info@maconresearch.com
The data contained in this catalogue are based on our general experience and knowledge at the time of publication and are intended to provide the reader with technical information about any possible uses. This information does not, however, constitute an assurance as regards product characteristics in relation to specific cases. We recommend that you request an interview with our consultants. We would be happy to provide you with samples.